Differential Service in Belton, Texas - What You Need to Know
Posted November 25, 2018 07:17 AM
Scratching your head? Don't worry, if you don't know what a differential is – you will in a moment. That fact is that if you drive a car anywhere in Belton, Texas, you have a differential. Whether your vehicle is front-wheel drive, rear-wheel drive or four-wheel drive, you have a differential. Some Belton vehicles might even have two or three.
Not surprisingly, a differential's job is to compensate for differences; specifically, they're the differences in wheel speed when turning. For instance, imagine taking a corner near your Belton, Texas, home. Your inside wheel has a shorter distance to travel than the outside wheel as you turn the corner. That means that your outside wheel has to turn faster to keep pace with the inside wheel.
The differential allows the wheels to turn at different speeds while still providing power to your vehicle. Without a differential, Belton residents' tires would scrub and hop along the pavement during turns like the early cars.
Ever noticed the big bulge in the middle of the rear axle on trucks? That's the differential. Rear-wheel drive vehicles have a differential in back. Most four-wheel drive trucks and SUVs will also have a similar differential on the front axle. A front-wheel drive vehicle's differential is called a transaxle because it combines the differential and transmission in one unit. An all-wheel drive vehicle will have a differential or transfer case that adjusts for speed differences between the front and rear drive wheels.
It can seem a little complex to some Belton drivers - but you can see that all of the engine's power is routed through your differentials. They're strong enough to handle the work, but- we've said it before - they need to be properly lubricated in order to stay strong. So from time to time, you need to schedule a differential service in Belton at Jones Automotive. The used fluid is drained and replaced with clean fluid. Some advise certain differentials to have special additives installed.
Get your differential serviced at Jones Automotive in Belton.
Jones Automotive Engine Air Filter Replacement
Posted November 18, 2018 06:16 AM
When your experienced Jones Automotive technician changes your oil, he will also inspect your air filter. You shouldn't need a new air filter at every oil change, but you will need to change it regularly. Heed your technician's auto advice if they tell you to change your air filter.
An air filter does what its name implies: it filters stuff out of the air. Air is drawn into your engine through the filter because your engine needs air to burn fuel. If the filter weren't there, a lot of dust and debris would come into the vehicle engine with the air when you are driving around Belton. That dust and debris would get hot, burn and produce all kinds of ash and gumminess that would eventually clog up your engine.
Drop in an air filter and voilá! Problem solved.
But air filters themselves get clogged up with all the junk they clean out of the Belton air. This doesn't allow the junk into the vehicle engine, but it does block up the airflow. A blocked airflow will reduce engine efficiency.
Belton residents who get a charge out of the feeling of power in their engine might consider upgrading their air filter. Talk to your friendly and knowledgeable Jones Automotive service advisor. Premium air filters have been proven to increase horsepower and torque. So with the cost of a premium air filter, you can increase the horsepower in your engine — there's no cheaper way to do that!
It's also one of the simplest elements of routine preventive maintenance – and it protects against damage to expensive vehicle electronic systems. No Belton resident should have an excuse to drive around Texas roads and highways with a dirty air filter.
The Engine Gets a Boost (Turbocharged Engine Maintenance)
Posted November 11, 2018 05:22 AM
If someone told you that your vehicle could have the same power but with a smaller engine, wouldn't that sound like great idea? Just think, a smaller engine would save you money at the gas station and you'd still get the same horsepower.
The technology to do just that has been around for a long time. It's called a turbocharger.
Race cars and other performance vehicles have been using turbochargers for years. It gives them a power boost without the need of a bigger engine, saving them fuel and pit stops.
Automakers have offered turbo gasoline and diesel engines for years, but there were problems with durability. Plus drivers had to make some driving adjustments with the way turbos delivered power. Newer turbos, though, have been vastly improved, and manufacturers are including them in more models. For example, Jeep offers its 2019 Cherokee with a choice of two engines that each make about 270 horsepower. One is a 4-cylinder turbocharged engine and the other is a 6-cylinder conventional gasoline engine. The general rule of thumb is: the fewer the cylinders, the better the fuel economy.
A turbocharged vehicle uses a turbine that is turned by exhaust gas. That compresses air that goes into the engine, which then allows it to use more fuel per second, increasing power. One advantage of a turbo is that it is only engaged when the driver demands more power from the engine by stepping on the throttle harder.
One thing to remember, though, is that turbocharged engines have additional parts and are more complex. That means they can be more expensive to maintain. The upside? You'll likely save fuel.
Like any complex machine, it's important that you maintain your turbo vehicle so it will give you more years of service. Jones Automotive technicians are trained to inspect and service the systems associated with a turbo engine. If you already drive a turbocharged vehicle, keep up your regular maintenance schedule to get the longest life and performance out of it.
Because of the advantages these powertrains offer, turbo engines are definitely here to stay.
Keep Your Tires Well Rounded in Belton: Tire Rotation and Wheel Balancing at Jones Automotive
Posted November 04, 2018 07:48 AM
Taking care of our tires is part of vehicle care for Belton drivers. We know they have to be replaced when they wear out, but tires also require some preventive maintenance. This maintenance will improve and extend the life of the tires, so it's well worth the effort and expense for Belton drivers to get it done. Tire maintenance includes keeping tires properly inflated, rotating tires and balancing wheels.
The recommended tire pressure for a vehicle's tires is printed on a sticker on the inside of the driver's side doorjamb. A lot of engineering goes into calculating the correct pressure, so it's an important number for Belton vehicle owners to know. Not following this recommendation can throw off the suspension system and can lead to tire damage. Underinflated tires wear out more quickly than properly inflated tires. Vehicles also get better traction and handling on properly inflated tires. Check your tire pressure at least once a week and add air if necessary.
Don't be tempted to add a bit of extra air to your tires when you fill them. Overinflated tires will cause the center tread to wear unevenly because of improper contact with the road. It will also affect the handling performance of your vehicle.
Rotating tires allows all four tires on a vehicle to wear evenly. Front tires get more wear than rear tires because they do most of the work on turns. Tire rotation allows all of the tires to spend time on the front of the car so they all experience the extra wear.
For most vehicles, tire rotation is simply a matter of moving the front tires to the rear and vice versa. Some vehicles, however, recommend a cross-rotational pattern. Other vehicles use asymmetrical tires, which means the right tires have to stay on the right side of the vehicle and the left tires on the left. Some vehicles use differently sized wheels on the front and back of the car and should not have their tires rotated.
What kind of rotation do you need? Check your owner's manual or talk to your service advisor at Jones Automotive. Your owner's manual will have information about how to rotate your vehicle's tires as well as letting you know how often you should get it done. For most vehicles, that's usually every 5,000 miles or 8,000 kilometers Your friendly and knowledgeable Jones Automotive professionals can also offer auto advice about tire rotation. A quick tire inspection can also indicate whether or not your tires are due to be rotated.
When it comes to tire maintenance for Belton drivers, wheel balancing is usually what we know least about. Balancing a wheel is necessary to keep it in constant contact with the road. If a tire is not balanced properly, it actually hops along the roadway. You can feel this hopping as a vibration in your steering wheel if the unbalanced tire is a front tire. You'll feel the vibration through your seat if a rear tire is unbalance. Properly balancing your tires is important and will extend their life span, improve handling and improve the safety of your vehicle. When you replace your tires, the new tires need to be balanced.
Never use different sized tires on the same axle of a vehicle. In other words, your front tires need to be the same size and your rear tires need to be the same size. Mixing sizes can lead to some serious handling problems for Belton drivers.
If you have an all-wheel drive or four-wheel drive vehicle, all four tires need to be the same size. If your tires are wearing out, you can sometimes make a new tire purchase fit within your budget by only buying two tires at a time. When you do this, the new tires should be installed on the rear of the vehicle. Rear tires are more in need of the traction than your front tires to avoid spinning out on slippery surfaces. If you drive a vehicle around Belton, you need tires, so you need to know how to care for them. The safety of your vehicle can depend on the condition of your tires.