The Easy Way to Save Cash in Belton
Posted February 24, 2019 09:57 AM
The hottest Texas news story may be different every day, but there's one topic that seems to come up over and over again – the price of gas in Belton. If you feel like most of your paycheck goes into your gas tank, this post is for you. Here are several basic things people in Belton can do to greatly reduce their gas consumption, save money, and help the environment. You can really improve your fuel economy by how you drive – but first, here's a review of things you can do for your vehicle that'll save gas no matter how you drive.
The first one for Belton drivers is keeping tires properly inflated. That can save 2 miles per gallon/.85 km per liter. Driving on low tires is like driving through sand – your car just has to work harder. Most Belton service centers will fill up your tires for free, so just ask Jones Automotive. Also, make a habit of checking your tire pressure whenever you fill up. Many Belton gas stations have an air hose you can use for free.
Another important item is to keep your air filter clean. An air filter all clogged up with dirt and bugs doesn't let enough clean air through to efficiently burn fuel. Using a dirty air filter will cost you almost 2 miles per gallon/.85 km per liter in reduced fuel economy. And worn spark plugs can cost about the same. A spark plug can fire as many as 3,000,000 times for every 1,000 miles/1,600 km driven. Check the vehicle owner's manual for replacement recommendations.
The biggest item is the oxygen sensor. This device provides the engine management computer with information it needs to fine-tune the fuel/air mix. When that's messed up it can cost Belton vehicles up to 3 miles per gallon/1.3 km per liter. And of course, there's dirty or substandard oil. Dirty oil causes extra drag. The wrong grade may be too thick. That's another .4 miles per gallon/.17 km per liter right there.
One item Belton residents seldom think about is their gas cap. A worn, loose or missing gas cap can cost another 2 miles per gallon/.85 km per liter. Adding up all of these worn, missing or sub-par items leads to a total of almost 11.4 miles per gallon/4.85 km per liter in reduced fuel economy! And with current gas prices in the Belton area, the cost really adds up. Taking care of these simple maintenance items will save Belton drivers at the pump.
Now most vehicles aren't missing on all of these items, but think about which ones might affect you right now! And don't forget tune-ups, dragging brakes, low transmission fluid, fuel system cleaning, wheels out of alignment, PCV valve, fuel filter and other services spelled out in your owner's manual.
Jones Automotive knows all this stuff and can tell you when you're scheduled to take care of each item. Create a system of your own to track your service schedules, or just use the computer system at Jones Automotive – which may also be updated with recall notices and maintenance schedule items from your vehicle manufacturer.
Relax When the Wind Blows in Texas: Winter Car Prep for Belton Drivers
Posted February 17, 2019 03:03 AM
When autumn comes around in Belton, leaves fall, nights get longer and there's a definite nip in the air. Time to unpack the boots and gloves and fold some extra blankets onto the beds. It's also time for Belton drivers to winterize their vehicles.
Here is some expert auto advice for Belton drivers on what vehicles need to keep everyone safe and rolling throughout the Texas winter months.
1. Check your antifreeze. Top it off or change it if necessary. You don't want your radiator, engine or hoses freezing up. If your vehicle isn't generating enough heat to keep you warm, your antifreeze might be low, or you might have a thermostat problem. Either way, you should get it checked out before the full force of Texas winter sets in. If you are due for a cooling system service at Jones Automotive in Belton, get that done as well.
2. Check your brakes. The slushy wet conditions of winter increase stopping distances. Ice exacerbates the problem. Your first concern, of course, is to make sure you adapt your driving habits to winter weather: slow down, and give yourself plenty of room to stop. Get your brakes checked at Jones Automotive and replace any worn pads or other parts. Check your brake fluid. It can accumulate moisture and decrease your stopping power.
3. Test your battery. A battery's cranking power drops in the cold, so if your battery is already weak, the onset of winter will do it in. The last thing you want is to be on a snowy Texas road in the dark and cold with a dead battery.
4. Pack emergency supplies. Toss a blanket into the trunk. If you do find yourself stranded, your first concern will be to stay warm. If you're traveling away from Texas population centers, then pack some emergency food and water as well. Also, it's a good idea to top off your tank in winter. That way, if you get stuck, you'll have some fuel to burn to stay warm, and it'll keep your gas lines from freezing up.
5. Check your wiper blades. They may be able to handle a light Belton summer rain shower, but they might not be up to the ice and snow that collect on a windshield in winter. If you experience particularly harsh winters or really wet ones, you can purchase special blades that resist freezing. And don't forget to top off your wiper fluid.
6. Check your tires. Tires lose pressure over time, but they lose pressure fast when it's cold outside in Belton. Tires lose about one pound of pressure every six to eight weeks; they also lose one pound of pressure for every 10°F/5.6°C drop in temperature. If the last time you checked your tires it was 80°F/26.7°C outside and it's 40°F/4.4°C now, your tires could be down five pounds in pressure — and that's serious. It's a safety issue and cuts down on your fuel economy.
7. Driving conditions in the Belton area may warrant special winter tires. Check with your friendly and knowledgeable Jones Automotive tire professional to get the right tires for your area and for your driving habits. If you are getting winter tires, it's always best to get them for all four wheels. But if you're only going to get two, put them on the rear wheels, even if you drive a front-wheel or four-wheel drive vehicle. Traction is more important on the rear of a vehicle if you want to prevent sliding or fish-tailing on slick surfaces.
So there you have it: a quick checklist to winterize your car in Texas. When it comes to car care, preventive maintenance is always the best practice for Belton drivers, especially when it comes to winter weather. None of us want to be caught out in the winter cold.
Smart Belton Drivers Protect Against Overheating
Posted February 10, 2019 04:23 AM
Engines get hot when they run. This heat can build up and damage vital engine parts, so engines need a cooling system to keep them running. Cooling system failure is the most common mechanical failure in vehicles. This is unfortunate, because these failures are usually easy for Belton drivers to prevent.
The radiator is the best-known and most recognizable part of the cooling system. Hoses filled with coolant (also known as antifreeze) connect the radiator to the engine. The coolant draws heat from the engine and then flows to the radiator. Air passing through cooling fans on the radiator cools the coolant. The coolant then cycles back into the engine to start the process over again.
The most critical component of the cooling system, however, is the coolant itself. A mixture of water and coolant/antifreeze helps keep it both from freezing and from boiling away. Either can result in serious engine damage.
Different engines require different types of coolant/antifreeze. The owner's manual will list what kind a vehicle requires. Using the wrong type or mixing different types of coolant/antifreeze may void the warranty on the cooling system and may damage it as well.
Insufficient coolant can lead to engine failure. Coolant levels need to be checked regularly and topped off as necessary. If coolant levels drop quickly or consistently, the cooling system should be inspected for leaks. Coolant/antifreeze contains additives that protect the radiator and other coolant components from rust, scale and corrosion. Over time, these additives are depleted, so it is necessary for Belton drivers to replace coolant at specified intervals. Changing coolant should be part of routine preventive maintenance for any vehicle.
This service is often ignored, though, since old coolant still cools the engine. Vehicle owners don't realize there is a problem until the system fails. They are left with major repairs and possibly a damaged engine, which could have been prevented with a cooling system service at Jones Automotive in Belton.
If your vehicle sends a warning message to check its coolant or if the temperature gauge is reading in the red or hot zone, then the cooling system needs serviced. This service is critical and should not be put off since the potential for damage is high.
In an emergency situation, water or antifreeze can be added to your vehicle so that it can be driven to a service center for proper car care. For this reason, your owner's manual contains instructions for how to top off insufficient coolant – allow 45 minutes for the engine to cool before attempting to add coolant or water. However, the fluid should be added to the coolant overflow bottle, not to the radiator itself. Removing the radiator pressure cap can result in severe burns.
Topping off in an emergency, however, does not fix the problem. The vehicle should immediately be taken to Jones Automotive in Belton where they can inspect the cooling system, repair any leaks and clean it if necessary. They can identify what caused the emergency situation in first place and ensure it doesn't happen again.
Regular maintenance of a vehicle's cooling system is just good auto advice for Belton drivers. Cooling system service is relatively inexpensive and doesn't take long at Jones Automotive. Lack of it, however, can put a vehicle in the scrap heap.
Talk to our service advisor at Jones Automotive for more information.
Under Pressure in Belton: TPMS
Posted February 03, 2019 08:21 AM
Have you noticed an increase in price when you get a flat tire fixed in Belton, or have your tires rotated? It might be the result of your TPMS, or Tire Pressure Monitoring System.
The federal government began requiring a TPMS system on 2008 model year passenger vehicles and light trucks. Some 2006 and 2007 models may have them as well. The system has a warning light that is mounted on the dashboard that will go on if one of the tires becomes severely underinflated.
Why the new requirement? Because underinflated tires are the number one cause of tire failure. Tire blowouts cause crashes and sometimes fatal accidents. Underinflated tires also need longer stopping distance and can skid, both of which also present dangers on Texas roads. Many flat tires can also be prevented by proper tire inflation, and though this may seem an economic consideration, Belton drivers who have changed a flat on the side of the road recognize that this has serious safety concerns as well.
Advances in tire technology, specifically the development of radial tires, has made it harder for Belton drivers to recognize when a tire is underinflated. At a recommended pressure of 35 psi, a tire is seriously underinflated at 26 psi. But the tire doesn't look low on air until it reaches 20 psi. This raises concerns about vehicle owners being able to tell when their vehicles are a safety hazard on the road. Hence, the TPMS.
So, like seatbelts, the TPMS system is expected to save a lot of lives. The technology has been in use in race cars for years, and now it's being mandated for all passenger cars, SUV's, minivans and pick-ups. Besides warning drivers in the Belton area when their tires need air, the system is required to indicate when it is malfunctioning.
This increased safety won't come without increased costs. Estimates regarding the cost of maintaining the TPMS on your vehicle run from $27 to $100. Also, there will be an added cost for tire repair. Belton service centers have had to purchase new scanning equipment to work with TPMS sensors and other equipment to repair tires and wheels equipped with TPMS. The pros at Jones Automotive have to be trained to use the new equipment. These costs will have to be passed on to Belton drivers.
Further, whenever a tire is changed, Jones Automotive will have to deal with the TPMS. Sensors will have to be removed, then re-installed and re-activated. Sometimes the act of changing a tire will damage a sensor, and it will need to be replaced. These extra services will come at an added charge to Belton drivers.
Tire rotations will require that the TPMS be re-programmed. And whenever a vehicle's battery is disconnected, the TPMS will require re-programming as well.
The TPMS itself will require attention – it contains batteries and sensors that will wear out and need to be replaced.
So, if you've noticed an increase in the cost for vehicle care at your Belton tire center, it may not be the economy. It could be the cost of the TPMS in newer vehicles. Before you dash off an angry letter to Congress, however, stop and consider what you're paying for. If predictions are correct, the TPMS will save lives, and that will be a benefit to all of us.
Of course, no warning system will save lives in Belton if drivers don't pay attention to it. And remember that the warning doesn't come on until the tire is severely under inflated; you still should check your tire pressure at least once a month. You can prevent accidents and potentially save lives without a warning system by keeping their tires properly inflated.