Automotive Tips from Jones Automotive: Signs of an Alignment Problem
Posted September 09, 2018 04:34 AM
When properly aligned, all of your wheels are pointed in the same direction. Your vehicle will track true and handle the way it is designed. Belton drivers often associate our wheels being “knocked” out of alignment with an event like an accident, hitting a pothole, curb or some other object.
While these can certainly take your wheels out of alignment, the bumps and bounces of everyday Belton driving take their toll on wheel alignment as well.
In addition, your vehicle can lose alignment over time with just normal driving. When your wheels are out of alignment, Jones Automotive in Belton can return your wheels to the vehicle manufacturer’s factory settings. Most owner's manuals suggest an alignment check every year or two.
Automotive Tips from Jones Automotive: Alignment Inspection
Posted October 16, 2017 07:02 AM
Uneven tire wear, the car pulling to one side or a steering wheel that is off-center are signs for Belton drivers that their wheels may be out of alignment.
When doing an alignment inspection, the service advisor at Jones Automotive will inspect your tires for uneven wear as well as suspension and steering parts for signs of wear or damage. He’ll also compare your current alignment with the vehicle manufacturer’s settings.
Your vehicle owner’s manual will have a recommendation for when to check alignment. Of course, this recommendation is based on normal driving. If you have been in a crash, hit a curb/pothole, frequently drive off-road around Belton, or notice any symptoms of misalignment, have your Jones Automotive service advisor perform an important alignment check.
103 N Main Street
Belton, Texas 76513
All Lined Up: Wheel Alignment Service at Jones Automotive
Posted May 16, 2017 09:50 AM
When all of your vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Hitting a road hazard or even just the normal bumps and bounces of everyday driving in Belton can cause your vehicle's wheels to be out of alignment.
Driving for an extended time around Belton when your wheels are out of alignment results in uneven tire wear. This is dangerous … and expensive. Worst case scenario, you have a blowout on a crowded Texas highway. It can also cause premature wear to your suspension system, which can be really expensive to repair. At the very least, you may have to replace your tires years too early.
The ideal alignment for your vehicle was designed by its engineers. Alignment service at Jones Automotive starts with an inspection of the steering and suspension – to see if anything's bent or broken. Then your friendly and knowledgeable Jones Automotive technician will look at tire condition.
From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. The wheels are then aligned to vehicle’s specifications.
Your vehicle owner's manual probably has a recommendation for how often your alignment should be checked – usually every couple of years. If you suspect an alignment problem, get it checked at Jones Automotive before you suffer expensive tire or suspension damage.
Go Straight: Wheel Alignment for Belton Automobiles
Posted December 25, 2016 11:48 AM
Belton drivers may have an alignment problem if their car drifts or pulls to one side, the steering wheel's off center, they notice uneven tire wear or the car doesn't feel like it handles right as they drive down Belton, Texas, streets and roads.
When all of a vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes, smacking a curb or other objects around Belton are great ways to knock a car out of alignment. Then one or more of your wheels start pulling in a slightly different direction and the problems begin.
The team at Jones Automotive in Belton wants you to know that driving for an extended time when your car is out of alignment causes your tires to wear unevenly and excessively. Sometimes the tire can be worn so badly that it will fail.
At the very least, those who drive with wheels out of alignment will have to replace their tires sooner. You could end up with premature wear to your suspension system, which can be expensive. The front wheel alignment is adjustable on all vehicles, and the back wheels are also adjustable on some cars.
Now, let's discuss some alignment basics. Wheels are adjustable for toe, caster and camber. The ideal alignment for your car was designed by its engineers.
So, what is involved in an alignment check at Jones Automotive in Belton? First, there's an inspection of the steering and suspension to see if anything is bent or broken. Tire condition will also be evaluated. Next, the vehicle is put on an alignment rack and we take an initial alignment reading.
If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle's centerline. If the back wheels aren't adjustable, the direction they push is determined and the front wheels are aligned to match.
Like most things, vehicle manufacturers have recommended a mileage interval for having alignment checked. But if you run into a curb, pothole or something else that's given you a big jolt, pay attention to whether your vehicle is pulling to one side when you drive around the Belton area. It's better for vehicle owners to have their alignment checked before waiting to see if there is uneven tire tread wear; by then, the damage is done.
Getting your alignment checked at Jones Automotive when necessary is a great way to extend the life of your tires and suspension parts. It also makes sure that your tire meets the road properly for maximum performance and safety in Texas.
Come see us at for more information about your tire alignment. We look forward to serving you.
Straight and True in Belton: Wheel Alignment
Posted September 19, 2016 10:42 AM
Most Belton folks worry about running out of gas or having a breakdown on the side of the road. That is why we practice preventive maintenance on our vehicles — that and to keep our repair bills down. But one important part of preventive maintenance that may get overlooked by drivers in Belton is a periodic alignment inspection.
Poor alignment causes tires to wear rapidly, unevenly or both. This means they will have to be replaced early, and new tires are more expensive than an alignment check in Belton. Bad alignment can also cause damage to suspension and steering systems, which can be expensive to repair in Belton.
Tire wear on misaligned wheels can also lead to blowouts, which are dangerous, can lead to serious accidents and can seriously damage your vehicle. Also, poor alignment itself can be the cause of an accident since the vehicle may not steer properly.
One or more wheels on your vehicle can be knocked out of alignment by running over a curb or a pothole on a bumpy Belton street. An accident — even a minor one — that involves a wheel on your car can lead to misalignment. The small bumps and bangs of everyday driving can also gradually put your wheels out of alignment.
If you have had wheel damage to your vehicle, or if you suspect that your wheels are out of alignment, you should get your alignment checked NOW. Any service center will give you that piece of auto advice. But good vehicle care suggests that you also get your alignment inspected on a regular basis. At Jones Automotive in Belton, we can take care of that for you.
Your owner's manual or Jones Automotive can give you a suggestion on how often your alignment should be checked. If it doesn't, then once a year is a good rule of thumb. However, if you drive a lot — and especially if you drive on rough surfaces a lot — then you may want to consider alignment more often. Ask the pros at Jones Automotive for a recommendation.
If your vehicle is out of alignment, one or more of the wheels is not tracking correctly and will “pull” against the others. Thus, one sign of poor alignment is that your vehicle pulls to one side when you drive around Belton. Also, if you are driving a straight path and your steering wheel is off-center, that usually indicates an alignment problem.
Belton drivers should also check the wear on their tires. If they seem to be wearing out too quickly, or if you notice that a tire is wearing on one side more than the other, you should get your alignment checked.
When you get an alignment inspection, your vehicle will be put on a rack and all the parts of the steering and suspension systems will be inspected for wear or damage. The alignment of the tires will be charted and compared to the original factory settings. If no repairs are needed on the steering or suspension systems, the wheels will then be adjusted to bring them back into alignment.
This may seem like a lot of bother for drivers, but it's a lot less trouble than a blowout or an accident. The old adage is good auto advice for all Belton residents: an ounce of prevention is worth a pound of cure.
So keep on driving, and keep all four tires on the road.
Tracking True in Texas: Wheel Alignment in Belton
Posted June 19, 2015 12:00 PM
The biggest issue for Belton area drivers is always safety. When your vehicle wheels are out of alignment, the vehicle will pull to one side, which could lead to an accident. When you're vehicle is out of alignment, you should have it taken care of right away at Jones Automotive in Belton.
When undergoing an alignment service at Jones Automotive, your vehicle is put on an alignment rack where the tires, steering and suspension parts are checked for damage. Then the alignment is charted and checked against the factory settings.
Precision adjustments are made to bring the wheels back into alignment. This gets all four wheels going in exactly the same direction.
Belton drivers should be aware of the signs of alignment problems. These include the car pulling to one side. Also, the steering wheel may not be centered when you're going straight. If you see the edges of one or more tires rapidly wearing down, you should have your Belton service center look it over. If you've been in an auto accident in Texas, you should get your alignment checked.
Obviously, a big jolt can seriously knock things out of alignment, but Belton area drivers also need to understand that a series of smaller ones can add up.
That's why we recommend periodic alignment checks. If your vehicle owner's manual doesn't specify the interval, once a year might be appropriate. Or check with a service advisor at Jones Automotive in Belton.
One thing's for sure: the cost of the alignment at Jones Automotive is cheaper for Belton drivers than having to buy a couple of new tires because of neglect.
Belton Alignment Service
Posted December 30, 2014 12:00 PM
Your car might have an alignment problem if: it drifts or pulls to one side, your steering wheel is off center, you have uneven tire wear or your car doesn't feel like it handles right. When all of a vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes around Belton and smacking a curb or other object are great ways to knock your car out of alignment. Then, one or more of your wheels starts pulling in a slightly different direction and the problems begin.
There are several things involved in an alignment check at Jones Automotive. First, there's an inspection of the steering and suspension systems - their components should be checked to see if anything's bent or broken. Then the tire condition needs to be inspected. From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle's center line. If the back wheels aren't adjustable, a technician at Jones Automotive can determine the direction they push and then align the front wheels to match.
Like most things, your manufacturer has suggested a mileage interval for having your alignment checked. But if you run into a curb, pothole or something else that's given you a big jolt, pay attention to whether your vehicle is pulling to one side when you drive. It's better to have your alignment checked before waiting to see if there is uneven tire tread wear - by then, the damage is done.
Getting your alignment checked at Jones Automotive in Belton when needed is a great way to extend the life of your tires and suspension parts. It also makes sure that your tires meet the road properly for maximum performance and safety.
Line Them Up: Wheel Alignment Service at Jones Automotive
Posted November 27, 2014 12:00 PM
Hello Belton! Let's talk about alignment. One of the most important parts of preventive maintenance for your vehicle is keeping the wheels in alignment. Poor alignment causes your tires to wear unevenly, which can significantly reduce their lifespan. This means you will have to replace them more often, which can be costly for drivers in Belton.
It can even damage your suspension system, which is costly to repair. But even more importantly, uneven tread wear can lead to blowouts on the road, a dangerous and potentially deadly safety risk for Belton drivers and their passengers.
It may not take an accident or bad driving habits to “knock” your tires out of alignment. Tires can go out of alignment with just everyday Texas driving. Belton road hazards, pot holes, uneven or gravel roads, and even the bumps and bounces of normal Belton roads and surface streets can gradually put your vehicle tires out of alignment.
So it's good auto advice to have your vehicle's alignment inspected periodically. Your vehicle's owner's manual will have recommendations on how often you should get an alignment check: usually every year or two. But if you think your vehicle tires might be out of alignment, you should bring your vehicle into Jones Automotive now.
When you bring your vehicle in for an alignment, your technician at Jones Automotive will start by inspecting the steering and suspension systems. If something is broken or damaged there, it will need to be fixed in order to get good alignment of the wheels.
If all looks good in the steering and suspension departments, the vehicle will then be put on an alignment rack where an initial alignment reading is taken. The wheels can then be aligned to the vehicle manufacturer's specifications. The ideal alignment for any vehicle is set by its engineers and may vary from vehicle to vehicle.
There are three types of adjustments that may have to be made to correctly align a vehicle's tires. The first is called “toe.” This refers to tires that are out of alignment because they point inward or outward at the front of the tire. Think of a person who is pigeon-toed or splay-footed, and you get the idea.
The second adjustment is the camber. This adjustment affects the angle at which the tires meet the road. Think of a solid building in contrast to the Leaning Tower of Pisa.
The last adjustment is the castor. This adjustment measures the angle of the tire in relation to the front axles. So, a piece of auto advice that just might be good for life as well: keep everything in alignment, and you'll be able to steer where you want to go. Drive safely.
Fuel Saving Tip: Alignment for Your Belton Vehicle
Posted March 28, 2014 12:00 PM
Imagine you've left Belton and you're up in the arctic on a dog sled.
Your dog team is pulling straight and true. You can cover a lot of ground quickly. Now imagine what would happen if one or two of the dogs wanted to go their own way and were pulling off to the side.
That would slow you down. You would have to work harder to keep the sled going where you want it. The dogs are all working as hard as before, but you're covering less ground for the same effort.
You're wasting kibble.
The same is true of your vehicle when the wheels are out of alignment. That wheel that's pulling to the side is dragging down the rest of the vehicle; so you push a little harder on the gas pedal to keep up your speed. You're wasting gas.
So have your wheel alignment checked at least once a year. It is important to get it checked right away if you feel the vehicle pulling to one side.
Sometimes we Belton residents bump a curb or hit a pothole and knock our wheels out of alignment. An accident can take the wheels out of alignment as well.
Belton residents need to make sure they're tracking straight. You'll get better fuel economy and your tires'll last longer. Now, mush!
Trip Inspection at Jones Automotive in Belton
Posted February 11, 2014 12:00 PM
Belton area drivers love their vehicles. And one of the most enjoyable things about them is taking a road trip. Freedom from daily schedules, new sights and the open road – it's great! But there's nothing like vehicle trouble to bring the fun to a grinding halt.
Now Belton drivers can't always avoid problems, but you can take steps to reduce the probability of getting sidelined on your trip. The first step is to look at your trip plan from your vehicle's perspective. What kind of roads will you be traveling – winding Texas byways? Purple mountain majesties or fruited plains? What weather conditions are you likely to encounter? How far will you travel each day? How much weight will you be hauling – passengers and luggage? Pulling a trailer, roof top carrier or ATVs? Will it be dusty?
Prepared with answers to these questions, you can schedule a trip inspection at Jones Automotive in Belton to help you prepare your vehicle for your big adventure. A lot of our Belton customers prefer to go through this exercise with their friendly and knowledgeable service advisor to get their input and make sure they haven't overlooked anything.
A great place for Belton drivers to start is with the tires. Inspect them for tread wear and proper inflation. Is it time to rotate your tires? Replace them? Are they up to the job? You wouldn't want to drive regular highway tires on a muddy off-road adventure on Texas rock-crawling trails.
Shocks and struts play a major role in both driving comfort and safety. If they need to be replaced, you'll really be glad you did once you hit the road. Is it time for a wheel alignment? Fighting a car that's pulling to one side all day can be tiring and dangerous.
And don't forget your brakes. Any strange noises, grabbing, soft or hard peddle feel? If there is any doubt, get a brake inspection at Jones Automotive in Belton before you leave.
Moving under the hood, have a belts and hoses inspection. If something is excessively worn or near failure, the stress of a long road trip might just be the straw that breaks the camel's back. Talk to your service advisor at Jones Automotive.
Your engine air filter will be inspected. Your car's air filter will process 12,000 times as much air as the fuel burned by the engine. If the filter needs to be changed, you'll notice improvements on your trip.
How close are you to your next oil change? Will you be able to complete your trip before it's due? If not, just get it taken care of before you go so that you don't need to interrupt your trip. In fact, a full service oil change at Jones Automotive is a great idea because they will top off all your fluids and check to see if any other maintenance items are due, such as transmission or cooling system service.
Do you notice any unusual odors in your vehicle? If so, it could be as harmless as a dirty cabin air filter. But if it's an exhaust leak, it could be fatal for Belton drivers and their passengers on a long trip. Of course you'll want to be comfortable, so get an air conditioning service if you aren't getting the cold air you’re used to.
Are your wiper blades still working well? If not, that is a quick and inexpensive fix for Belton drivers. Headlamps are often overlooked when planning for a trip. If you haven't changed the bulb in six months or so, replacement bulbs will really light up the night on your trip and provide the necessary after-sundown visibility.
All the items mentioned are part of any good vehicle maintenance plan. These are things that you want to take care of anyway, but they all become more important as you plan for your trip.
They will always save you money in the long run and may prevent inconvenient stops and delays on your trip. After all, you wouldn't want to miss the world's largest ball of string, would you?