Service Videos

Home » Services » Shocks & Struts (4)

When Do My Shocks Need to Be Replaced?

Posted March 24, 2019 08:48 AM

A good suspension system gives a vehicle a smooth, even ride while providing Belton drivers with good handling and control. But like any system on your vehicle, parts of the suspension system can wear out, leading to a lower ride quality and safety concerns. So it's a good idea for drivers in Belton to remember their suspension system in their schedule of preventive maintenance. Springs do most of the work of the suspension system. The most common types of springs are coil and leaf, but air springs and torsion bars are becoming more common. The body of the vehicle is “suspended” by the springs.

If springs were the only working component in your suspension system, however, you'd spend your travel time bouncing up and down like a bobblehead. That's where your shocks come in. They keep the rebound, or bounciness, of the springs under control. Shocks also keep your tires on the road, which keeps the driver in control of the vehicle. Some vehicles have struts in their suspension system. Struts are a compact combination of springs and shocks. They do the same job but in a single package.

Shocks wear out gradually, so it can be difficult for Belton drivers to notice when they need to be replaced. There's no definitive point when a vehicle's ride goes from "smooth and controlled" to "a bit imprecise." To check if your shocks or struts are worn, you should first do a visual inspection on them. If they are leaking fluid, they need to be replaced.

There are other less obvious signs that your suspension system needs attention. For example, an uneven, cupping wear on your tires may indicate that your shocks are worn. If your vehicle feels “floaty” when you turn, or, in other words, you don't feel that you have full control of the vehicle, you should check your shocks. Also, if the front end of your vehicle dips noticeably when you stop, it's time for new shocks.

Your owner's manual gives recommendations on how often the shocks should be checked, usually between 15,000 and 30,000 miles (24,000-50,000 km). If one of your shocks does need to be replaced, you should replace all four. This will keep your suspension even and ensure good handling of your vehicle. If you carry heavy loads, tow a trailer or drive on uneven Belton area terrain, you might also consider upgrading to a heavy-duty shock.

Regular shocks contain hydraulic fluid. The fluid helps them absorb the bumps or “shocks” of the road so the impact doesn't transfer to the vehicle's body. Premium shocks are filled with compressed nitrogen gas, which costs more but does a better job of controlling body motions. Regular shocks can develop air bubbles that reduce their effectiveness; the premium shocks don't have this problem. So if you want higher handling performance, if you drive off-road around Texas or if you just want added comfort, you should consider upgrading to premium shocks or struts.

Replacing struts can put your vehicle out of alignment, so an alignment check should always follow this type of repair. Talk to your service advisor at Jones Automotive in Belton for more information.

Jones Automotive
103 N Main Street
Belton, Texas 76513
(254) 939-3785

 



Upgrade Shocks for Better Handling in Belton

Posted August 21, 2017 03:03 AM

Many Belton drivers probably don't think of their shock absorbers as an important safety system; but that's just what shocks and struts are. They're all about ride control – keeping your vehicle tires in contact with the road and managing body motion.

Every time you hit a bump or pothole on a Belton road, your tire wants to bounce up. The bigger the bump, the higher the bounce. Your shocks or struts push down on the tire to maintain the traction you need to start, stop and turn.

If you've ever ridden in a vehicle with bad shocks, you know how it wallows on corners. The front end dives when you hit the brakes and the rear end squats when you accelerate. It's not only uncomfortable, it is difficult to handle.

You may have heard vehicles described as having “flat cornering." That means that when you take a corner, the body doesn't roll very much. When shocks start to get worn, your vehicle will roll more on corners. The weight of your vehicle's body shifts and tosses your vehicle to the outside of the turn, making it harder to control.

With good shocks, you can turn corners with confidence. When the shocks are bad, the body rolls too much and you need to slow down to maintain the same level of control. When you have to combine brake dive with body roll, you can quickly end up with an unsafe handling situation.

Shocks can break or start to leak, but they usually just wear out. After all, your vehicle shocks will move up and down over 75 million times in 50,000 miles/80,000 km. If you replace shocks at Jones Automotive in Belton, it will restore your vehicle's original ride control and quality. You can even upgrade shocks and struts if you want better handling or towing capacity on Texas roads.

Shocks are an important safety system: don't wait until they are completely shot, perhaps risking your safety or damaging other suspension components. At Jones Automotive we can help you with quality shocks and struts as advised in your owner's manual, usually at around 50,000 miles/80,000 km, for a comfortable, safe handling ride in Belton.

Give us a call.

Jones Automotive
103 N Main Street
Belton, Texas 76513
(254) 939-3785



Suspension Service at Jones Automotive in Belton

Posted October 14, 2014 12:00 PM

During an inspection at Jones Automotive in Belton, your friendly and knowledgeable automotive service technician will check for worn, broken or missing parts.

Here's a quick rundown of suspension system components:

There are the springs which hold the weight of your vehicle. There are several varieties of springs. Springs are heavy duty parts that rarely break or wear out. Shock absorbers work in conjunction with springs to smooth out the ride and help keep the tires on the road. Good shocks are essential for handling performance and ride comfort.

You've probably heard of struts. They combine a shock absorber and a coil spring in one unit. Shocks and struts will wear out over time. If your tires develop a cupped wear pattern, your shocks or struts may be wearing out. This is from the shocks bouncing unevenly. You may notice a floaty or drifting sensation when cornering. If the front of your vehicle dives excessively when stopping, or rocks back and forth after you've stopped, your shocks may be worn out. And if they are leaking fluid, it's definitely time to replace them at Jones Automotive.

If you are experiencing any of these symptoms, visit Jones Automotive for a suspension inspection. Same applies if you've been in an accident that involved one of your wheels. If your vehicle suspension actually fails, it could lead to a serious accident, so don't put it off.

When you replace your shocks, it's usually a good idea to replace all four at the same time. That'll give you more even handling. Talk with your friendly and knowledgeable pros at Jones Automotive because you don't want a big difference between the performance of your shocks from wheel to wheel, and replacing all may be the safest bet.

There are different grades of shocks and struts. You always want to use a replacement shock or strut that equals the one that came as original equipment when your vehicle was new. But remember, they were designed to meet the expected needs of the broad range of Belton people who buy that particular vehicle. Your needs may be more specialized.

For example, if you want increased handling performance, your Jones Automotive service advisor can recommend an upgraded shock or strut specially designed for improved handling. If you haul heavy loads or trailers in Belton, we can recommend some heavy duty shock absorbers.

Jones Automotive
103 N Main Street
Belton, Texas 76513
(254) 939-3785

 



Suspension Service in Belton at Jones Automotive

Posted February 11, 2014 12:00 PM

When they hear the word suspension, many drivers in Belton may think back to those energetic days of grade school. Well, your vehicle's suspension is actually a good thing because it keeps your vehicle up off the road and helps provide a comfy ride around Belton. Its job is to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your vehicle, it's basically everything that connects your wheels to the vehicle's frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service at Jones Automotive.

Here are some warning signs of suspension problems:

  • the car pulls to one side
  • it wanders
  • the steering is erratic
  • you see uneven tire wear
  • you experience a poor ride or handling
  • you see oil leaking from shocks

Basically, you just don't feel in control when you're driving.

Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor at Jones Automotive can perform an inspection and tell you what problems you may have.

If you're in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Belton or even a large rock can mess things up for drivers. With a minor accident it's tempting for many to just get an alignment or wheel balance to correct the problem. But if there's damage, a simple alignment won't actually fix the problem, and you'll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems are a major safety issue because they can lead to unsafe handling.

One big cause of suspension damage for Belton drivers is potholes – those nasty magnets that form in roads in freezing weather. They seem to draw our tires right into them. Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can't miss, slow down before you hit it. Driving at a slower speed will limit the damage and may keep your drink from spilling. But avoid the temptation to brake directly over the pothole. That will cause the car's weight to shift forward and add to the potential damage.

Jones Automotive
103 N Main Street
Belton, Texas 76513
(254) 939-3785